FORMATION AND DISTRIBUTION OF HEAT FIELD IN CUTTING TITANIUM ALLOYS
Keywords:
Titanium alloy, Ti-6Al-4V, cutting process, heat field, SimScale, temperature distribution, cutting instrument, modeling, mechanical machining, tool eating.Abstract
In this thesis, the formation and distribution of the thermal field generated during the machining process of titanium alloys were studied. During the research, the cutting process of the Ti-6Al-4V titanium alloy was modeled using the SimScale software. The simulation results showed that the maximum temperature in the cutting zone occurs in the contact area between the tool and the workpiece. In addition, it was observed that an increase in cutting speed and cutting force leads to a rise in the amount of generated heat. Based on the obtained results, recommendations for selecting optimal machining parameters were developed.
References
1. Arrazola, P. J., Özel, T., Umbrello, D., Davies, M., & Jawahir, I. S. (2013). Machinability of titanium alloys (Ti6Al4V and Ti555.3). Journal of Materials Processing Technology, 213(8), 1336–1344. https://doi.org/10.1016/j.jmatprotec.2013.02.005
2. Saydakhmedov R. Kh., Xakimov X. I. The effectiveness of the application of CNC machines for processing hard-to-machine parts of aircraft // Bulletin of Civil Aviation Academy. – 2023. – №1 (28). – P. 31–36.
3. Saydakhmedov R.Kh., Jabborov A.F. Features of cutting titanium alloys//Science and innovation. International scientific journal, Volume 3 ISSUE 5 May 2024. P. 213-216.
4. Umbrello, D. (2020). Finite element modeling of titanium alloys machining: A review. Procedia CIRP, 93, 10–17. https://doi.org/10.1016/j.procir.2020.04.008
5. Ezugwu, E. O., & Wang, Z. M. (2015). Titanium alloys and their machinability—A review. Journal of Materials Processing Technology, 68(1-3), 97–104. https://doi.org/10.1016/0924-0136(96)02404-2
6. Ducobu, F., Rachdi, F., & Guillot, M. (2017). Modelling of tool wear in high-speed machining of titanium alloys. Wear, 382–383, 101–113. https://doi.org/10.1016/j.wear.2017.07.006
7. Zhang, X., M'Saoubi, R., & Özel, T. (2021). Mechanistic modeling of tool wear in machining of difficult-to-cut alloys: Titanium case study. CIRP Annals, 70(1), 391–394. https://doi.org/10.1016/j.cirp.2021.04.025
8. Сайдахмедов Р. Х. Прогрессивные технологии производства конструкций летательных аппаратов из титановых сплавов: Учеб. пособие - Ташкент: Изд-во ТГАИ, 2005. - 54 с.
